5
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation
1
Preparing the mounting bracket
2
Installing the light bulbs
□
Fasten the mounting bracket (AA) onto the outlet box using
two outlet box screws (BB).
□
Screw the threaded tube (GG) into the mounting bracket (AA),
and secure it using the lock washer (FF) and hex nut (DD).
NOTE:
The threaded tube (GG) should extend long
enough to protrude through the canopy when it is
mounted. (Adjust as needed).
□
Install the light bulbs (not included) into the sockets. Use three
60-watt maximum medium base (E26) type A bulbs.
NOTE:
You can also use three 13W maximum medium base
(E26) SBCFLs (sold separately).
Do not exceed the
recommended wattage.
3
Assembling the glass diffuser to
shade assembly
□
Turn the shade assembly (E) facing upside down, place the
glass diffuser (F) onto the shade assembly, and ensure the
two pipes of shade assembly (E) pass through the two holes
of the glass diffuser (F).
□
Place the plastic washers (KK) and metal washers (JJ) over
the two pipes, then screw the two hex nuts (DD). Do not
tighten. Place the caps (NN) over the two pipes and secure
with two small finials (II).