background image

 

QQ: Fan wall control
RR: Light wall control
SS: Fan wall control output wire
TT: Light wall control output wire

8

3

Making the electrical
connections

Assembly — Hanging the Fan (continued)

WARNING:

 To avoid possible electrical shock, be sure 

electricity is turned off at the circuit  breaker or main fuse box 
before wiring.

WARNING:

 Check to see that all connections are tight, 

including ground, and that no bare wire is visible at the wire 
nuts, except for the ground wire.

Connect the black (II) and blue (JJ) color wires from the 
fan to the hot wire (black) (KK) from ceiling.
Connect the white (LL) color wire from the fan to the 
neutral wire (white) (MM) from ceiling.

Follow the steps below to connect the fan to your house 
supply wires. Secure the wire nuts (EE) supplied with your fan 
by wrapping the connections with electrical tape.

EE

C

 

II

JJ

LL

MM

NN

PP

OO

KK

 

EE

QQ

RR

C

 

II

JJ

MM

MM

KK

TT

TT

SS

SS

If there is a ground wire (NN) (green color or bare copper
color) in your outlet box, connect the green wire (OO)
from the fan to it. If there is not a ground wire in your 
outlet box, connect the green wire (OO) from the fan to 
the green wire (PP) from the mounting bracket (C). 
Secure the wire connection with the plastic wire nuts (

EE

).

If you wish to install an optional wall control, use this diagram 
as a guide but refer to the installation manual for the wall 
control for the correct color and wire connections.

NN

NN

OO

PP

Содержание 14414

















Отзывы: