11
HAMPTONBAY.COM
Please contact 1-800-527-0998 for further assistance.
8
Attaching the light kit plate
to the mounting ring
9
□
Remove one of
three
mounting ring screws (WW) and
loosen other two screws on the mounting ring (K).
Place the key holes on the light kit plate (F) over the
two
mounting ring screws (WW) previously loosened from
the mounting ring (K),
and turn the light
kit plate (F)
until it locks in place at the narrow section of the key
holes.
□
Secure the light kit plate (F) by tightening the two
screws (WW) previously loosened and replacing the one
previously removed.
□
Attaching the light kit to the
light kit plate
□
Remove
the three
screws (XX) on
light
kit plate (F).
□
While holding the light kit assembly (G) under your fan,
firmly snap the wire connection plugs (YY) together.
□
Carefully push all wires back into the light kit (G), then
install the light kit assembly (G) onto the
light
kit plate (F)
with the
three
screws (XX) previously removed. Be sure to
tighten all screws
securely
.
Assembly — Installing the Light Kit
K
F
F
XX
YY
YY
G
WW
