12
Assembly - Attaching the Light Kit
Attaching the light kit fitter assembly
2
☐
Remove one screw (RR) from the light kit pan (H) and loosen,
but do not remove the other two screws.
☐
Connect the wires from the light kit fitter assembly (I) to the
wires from the fan motor assembly (E) by connecting the
molded adaptor plugs together. Carefully tuck all wires and
splices into the switch cup.
☐
Push the light kit fitter assembly (I) up to the light kit pan (H)
so that the two loosened screw heads fit into the keyhole
slots. Turn the light kit fitter assembly (I) clockwise to secure.
☐
Re-install the screw (RR) that was removed in step 1.
☐
Make sure all the screws are firmly tightened.
CAUTION:
To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit pan.
1
Installing the light kit pan
☐
Remove one screw (PP) from the black bracket below the fan
motor assembly (E), and loosen but do not remove the other
two screws.
☐
Push the 9-pin connectors of the motor assembly through the
hole of the light kit pan (H).
☐
Connect the wires from the light kit pan (H) to the wires from
the fan motor assembly (E) by connecting the 9-pin connectors
together. Carefully tuck all wires and splices into the switch
cup.
☐
Push the light kit pan (H) up to the fan motor assembly (E) so
that the two loosened screw heads fit into the keyhole slots.
Turn the light kit pan (H) clockwise. Re-install the screw (PP)
that was removed in step 1.
☐
Make sure all the screws are firmly tightened.
IMPORTANT:
It is critical to attach the light kit pan (H) using
the quick connector. The fan will not operate unless the light
kit pan is connected to the fan.
I
RR
H
PP
