XX
L
UU
VV
WW
G
□
Slip the fan pull chain from the switch housing into
the outside hole on the light kit stem holder (XX).
□
While holding the glass shade (L), feed the fan pull
chain through the eyelet on the glass shade (L).
□
Place the glass shade (L) over the light kit stem, and
secure with the metal nut (UU) (rubber side on the
top).
□
Fit the glass cap (VV) onto the light kit stem, and then
slip the fan pull chain through the hole on the side of
the glass cap (VV).
□
Feed the light pull chain from the light kit stem
through the glass cap (VV) and the decorative nut
(WW). Thread the decorative nut (WW) securely. Do
not overtighten.
CAUTION:
Before starting installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
Assembly — Installing the Light Kit (continued)
13
Installing the glass shade
□
Disassemble the switch housing (YY) from the light kit
assembly (K). You can keep the light kit (K) for future
use.
□
Attach the plastic plug (BB) to the switch housing
(YY).
□
While holding the switch housing (YY) under the fan,
snap together the wire connection plugs (TT).
□
Install the switch housing (YY) to the light kit
mounting plate (J) with light kit mounting screws (SS)
provided. Be sure to tighten all screws.
14
Installing the fan without the
light kit (optional)
BB
SS
TT
G
J
YY
18
