7
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation (continued)
5
Attaching the globe
□ Align the three slots on the globe (E) with
the three divots located inside the
canopy (F).
□ Screw the globe (E) clockwise into the
canopy (F).
□ The globe (E) only turns about 1/6 of a turn.
Do not over tighten.
Care and Cleaning
□ Clean the fixture with a soft, dry cloth.
□ Do not use any cleaners with chemicals, solvents or harsh abrasives.
WARNING:
Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker
off or removing the fuse from the fuse box.
Troubleshooting
Problem
Possible Cause
Solution
The bulb will not light.
The power is off.
Ensure the power supply is On.
The circuit breaker is
off.
Ensure the circuit breaker is in the On
position.
The fuse blows or circuit
breaker trips when the light
is turned on.
The wires are crossed
or the power wire is
grounding out.
□
Check the wire connections.
□
Contact a qualified electrician or
call the Customer Service Team at
1-855-HD-HAMPTON.
Applying caulk
6
□
Caulk the space between the wall
and the full area of the wall plate
(A) to prevent water seeping into
the outlet box.
