6
Installation (continued)
3
Mounting the light fixture
□
Align the mounting holes in the backplate (B) with the two studs (CC).
□
Insert the two studs (CC) through the backplate (B), and secure the fixture with the two acorn nuts (DD).
□
After installing the fixture, caulk the upper 2/3rds of the wall plate to the mounting surface. Leave
the bottom 1/3rd uncaulked to allow for drainage of any water that might leak into the enclosure. The
manufacturer recommends a non-drying exterior caulking material. A good example is a clear silicone
rubber sealant for exterior use.
□
Restore the power at the fuse or circuit breaker box.
CC
B
DD
4
Caulking
□
Caulk around Back Plate (B) and mounting surface with silicone sealant (not included).
