5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation
1
Assembling the fixture
NOTICE:
The spike is located inside the post.
WARNING:
Never push the fixture into the ground by the
fixture head or use a hammer to insert the spike into the
ground.
□
Attach each top cap (A) onto each lens by pressing it
downward on the lens (B). Attach the lens to the post by
pressing them together.
□
Attach the plastic spike (D) to the post (C) by pressing them
together.
2
Replacing the battery
NOTICE:
This operation should be done in the morning on a sunny
day. This will allow the lantern to receive a full 8 hours of sunlight so
that the rechargeable battery/batteries can reach maximum capacity.
□
Remove the top cap (A) by pulling upwards.
□
Remove the 3 screws securing the battery cover.
□
Remove the old 800 mAh battery and replace it with a new
AA size 1.2V, Ni-Mh, 800 mAh rechargeable battery.
NOTICE:
Clean the battery contacts and those of the device prior to
battery installation.
□
Be sure to insert the battery in the proper direction.
□
Replace the battery cover.
□
Replace the top cap (A) by pushing downwards.
C
B
A
D
A
Battery
Battery Cover
