WARNING:
The tab in the ring must rest in the groove of
the hanger ball (D). Failure to properly seat the tab in the
groove could cause damage to the wiring.
5
Installing the mounting bracket
to the electrical box
□
Pass the 120-volt supply wires through the center
hole in the mounting bracket (A).
□
Install the mounting bracket (A) to the outlet box with
the screws and washers provided with the outlet box.
□
Securely tighten the two mounting screws.
Hanging the fan from the mounting
bracket
6
Assembly — Hanging the Fan
A
WARNING:
To reduce the risk of fire, electric shock or
other personal injury, mount the fan only to an outlet box or
supporting system marked acceptable for fan support and
use the mounting screws provided with the outlet box.
□
Carefully lift the fan motor assembly (F) up to the
mounting bracket (A) and seat the hanger ball /
downrod assembly (D) in the mounting bracket (A)
socket. Make sure the tab on the mounting bracket
(A) socket is properly seated in the groove in the
hanger ball / downrod assembly (D). This will help to
balance the ceiling fan.
F
D
A
Outlet
Box
10
