Hampshire Controls ToSentry Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 22

Hampshire Controls ToSentry Скачать руководство пользователя страница 17

Hampshire Controls Corp.

Revision 1.2

Temperature Transmitter Operating Instruction

Page 16 of 21

©2014

To  increase  the  silence  period  tap  the  DISP/PROG
button, to decrease the silence period tap the MUTE/CAL
button.  When you are finished, or if you do not want to
change  the  value,  simply  wait.    If  no  buttons  are  tapped
for  5  seconds,  the  current  value  will  be  saved  and  the
next option will be displayed.

This  indicates  that  you  are  about  to  change  the  Door
Switch Alarm Polarity.  If you tap either the DISP/PROG
button  or  the  MUTE/CAL  button  the  current  Switch
Polarity will be displayed on the LCD.

The  door  switch  alarm  polarity  options  are  Alarm  on
OPEN or Alarm on CLOSED indicated by the two LCDs
shown  to  the  left.    Alarm  on  OPEN  indicates  that  the
alarm  will  be  triggered  when  the  contacts  of  the  switch
are  open-circuit.    Tap  either  the  DISP/PROG  or
MUTE/CAL button to toggle between the two options.

If your Temperature Transmitter does not have the Door

Switch option, this value must be set to

.

This  indicates  that  you  are  about  to  change  the
temperature  display  to  either  degrees  Celsius  or  degrees
Fahrenheit.    If  you  tap  either  the  DISP/PROG  button  or
the  MUTE/CAL  button  the  current  selection  will  be
displayed on the LCD.

Tap either the DISP/PROG or MUTE/CAL button to
toggle between the two options.

This  indicates  that  you  are  about  to  change  the
calibration  method  to  either  one  point  or  two  points.    If
you tap either the DISP/PROG button or the MUTE/CAL
button  the  current  selection  will  be  displayed  on  the
LCD.

1Pt  is  for  field  calibration  using  a  single  known
temperature.    2Pt  is  primarily  for  factory  calibration  at
0°C  and  40°C.    Tap  either  the  DISP/PROG  or
MUTE/CAL button to toggle between the two options.

After the 5 second timeout following the CAL mode programming, any modified settings will be
saved, the display will turn off and the device will return to its normal operation.

You may exit Program Mode at any time by pressing-and-holding the DISP/PROG button for 5
seconds. You will hear two short beeps and the display will turn off.

MODIFICATIONS TO

THE SETTINGS WILL NOT BE SAVED!

«
...
15
16
17
18
19
...
»

Содержание ToSentry























Отзывы:

Нет отзывов