Hammond XLK-5, Руководство пользователя

Страница: 6 / 16


Owner’s Manual
6
HOOK UP
CU-1
HEAD
PHONES
CU-1
TO KEYBOARD PEDAL
H-BUS
Upstream Downstream
HOOK UP WITH XK-5, XLK-5, XPK-250W, CU-1, ST-XLK5W

Connect the

cables as shown in the diagram above.

IMPORTANT: Th e

interface provides for DC power as well as system
communication, therefore it is not necessary to utilize the “DC IN” jack on the
Expression Pedal when connecting to the XK-5.

In addition, no special confi guration is required. Each device is confi gured auto-
matically.
NOTE: The above diagram shows only the connections for the Pedalboard and Expression
Pedal. For information on other connections such as AC power, audio, Leslie, etc.
Please consult the XK-5 Owner’s Manual.
Th is keyboard uses Hammond’s new

interface which
will supply both DC power and data transfer using a single
connection.
IMPORTANT: Use the

cable provided with this in-
strument for all

connections. DO NOT use a 4-pin
XLR or other type of connector. Doing so may result in dam-
age to the instrument.