Hammond XK-5, Быстрый старт

Страница: 38 / 42

36
SPECIAL SECTION:
1. Using the XK-5 with the XLK-3 Lower Manual
If you have a Hammond XK SYSTEM and you want to use an XK 5 in place of the XK 3c Drawbar Keyboard, you can
do so. The XLK 3 Lower Manual will work in conjunction with the XK 5. However, there are two things you should
know:
1. The XLK 3 is a single contact manual. Therefore, all the Drawbar tones will sound simultaneously you won't
hear the individual harmonics play one after the other. For this effect, you will need the XLK 5 Lower Manual
designed for use with the XK 5.
2. There is also a small set up procedure to allow the XLK 3 to work correctly with the XK 5. Do the following:
A. Touch the MENU/EXIT Touch Button once.
B. Touch the PAGE UP Touch Button THREE Times.
C. Touch the PAGE RIGHT Touch Button THREE Times. The word "MIDI should now blink.
D. Touch the ENTER Touch Button to select the MIDI Edit Menu.
E. Use the VALUE Rotary Knob to select “2or3 KBD”
F. Touch the ENTER Touch Button to select the MIDI Template.
G. After you have made your selection, Touch the PLAY Touch Button to return to PLAY Mode.
Doing the above will affect the performance of the XK 5 in three ways:
1. The SPLIT feature is disabled. The Lower Manual Drawbars will play from the XLK 3.
2. The PEDAL TO LOWER function will work on the XLK 3.
3. The Preset Keys on the XLK 3 will recall the Lower Manual Presets (including Pedal registrations)
independently of the Upper Manual Presets.
NOTE: If you use the XK 5 with an XLK 3 Lower Manual, be advised that the Wood Grains may not match
completely the Walnut finish on the XLK 3 may be a little lighter than the dark walnut finish of the XK 5.