Hammond XK-5, Быстрый старт

Страница: 12 / 42

10
You can use the XK 5 with a large variety of Vintage Leslie Speaker Cabinets, but you will need the appropriate
“Kit” to allow the 11 pin XK 5 to communicate with a Vintage Leslie. Contact your Hammond Dealer.
If you are using an old style "Leslie Combo Pre amp" (such as the one shown below) to connect to a vintage Leslie
Speaker Cabinet, you can use 1/4" cables .
Attach a cable from the LEFT/MONO jack on the XK 5 to the appropriate input on the Combo Pre amp. MAKE
SURE to turn the BYPASS Touch Button "ON."
This sends a “raw” signal out, bypassing the Internal Digital Leslie Circuitry. This prevents an unpleasant effect
where an already effected signal is processed through the Leslie Speaker Cabinet. When you use a Leslie Combo
Pre amp, the Leslie speed controls for the XK 5 (the Touch Tabs and/or CU 1 switch).have no effect on the
connected cabinet. You must use the foot switches mounted on the Leslie Combo Pre amp.