manualshive.com logo in svg

Hammond XK-1c, Руководство пользователя

Поделиться
Скачать
Hammond XK-1c Скачать руководство пользователя страница 71

71

Setting the Parameters

  TUNE

In this mode, the entire keyboard is tuned.

To locate this mode:

 

TRANSPOSE

❶

  

TRANSPOSE

You can set Transpose in the range from -6 to +6 semi-tones. 
Transpose is mapped to the following points:
i)  Between the built-in keyboard and the on-board sound engines.
ii)  Between the MIDI IN and the on-board sound engines.
iii) To the External Zone.
iv) When the MIDI pedalboard XPK-100 is connected, transpose value will syn-

chronize with it.

NOTE:  Transpose is a temporary parameter, and is not recorded to any patch. When the 

power is switched OFF, it returns to 0. 

 

MASTER TUNE

❷

 MASTER TUNE

Th

  is is for tuning the entire keyboard.

Th

  e setting range is A = 430 to 450 Hz.

NOTE:  Master Tune is a global parameter. It is recorded when it is set, and is common for 

each patch.

See “Function mode” (P. 62) for operation details.

❶

❷

Содержание XK-1c













































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды