Hammond XK-1c, Руководство пользователя

Страница: 17 / 140

17
Hook-Up
CONNECTING THE LESLIE SPEAKER
An 8-pin type Leslie speaker can be directly connected to this keyboard.
Switch keyboard OFF before connecting the Leslie speaker.
BASIC CONNECTION OF THE LESLIE SPEAKER
Connect the Leslie Speaker #2101, or #2101mk2 and the Leslie 8-PIN jack on this key-
board with the exclusive 8-pin Leslie cable (optional LC-8-7M, not included).
NOTE: The Leslie terminal on this unit is of 8-pin specifi cations. Use the Leslie adaptor XLD-811
(optional) to connect a 11-pin spec. Leslie speaker e.g. #122XB.
1. Make the setting of Tone-Wheel organ.
2. Switch “ON” the [BYPASS] button, set the [STATIONARY VOLUME] of the
#2101/mk2 at desired volume.
3. Repeat “ON/OFF” the [BYPASS] button with playing the keyboard, set the [RO-
TARY VOLUME] of the #2101/mk2 at same volume which you can hear.
MIDI CONTROL OF THE LESLIE SPEAKER
To control the parameters of the Leslie Speaker #2101, #2101mk2 (fi ne adjustment of
the rotor speed or the rise time, etc.):
1. Connect the MIDI OUT of this unit with the MIDI IN of the Leslie speaker with a
MIDI cable.
2. Set the keyboard channel - UPPER and the Leslie MIDI channel to the same chan-
nel. (P. 109)
When this unit detects that the Leslie speaker is connected, the Leslie parameters sent
through MIDI from this unit are switched from the XK-1C original to those for the
Leslie speaker.
E
LESLIE SPEAKERS TO BE CONNECTED
This keyboard is designed to connect with
3 channel Leslie speakers such as the model
#2101. However, it is also possible to connect
1 channel type Leslie speakers such as #3300
sending the stationary channels to the LINE
OUT jacks independently. (P. 80)
LESLIE CHANNEL
3 channel type Leslie speakers are equipped
with a stereo speaker system, independent of
the rotor, to provide direct organ sounds.
A traditional 1-channel Leslie, such as a #122
or #147 has no stationary speaker system, re-
quiring a separate amplifi er/speaker for the
direct organ sounds.
8-pin Leslie Cable
MIDI Cable (Optional)