Hammond SKX, Руководство пользователя

Страница: 81 / 156

81
Setting the Parameters
VIB&CHO ( Vibrato & Chorus)
In this mode, the settings specifi c to Vibrato and Chorus are adjusted.
To locate this mode:
❶
MODE
Sets the Mode of the Vibrato and Chorus eff ect.
V1 (C1): light vibrato (chorus)
V2 (C2): vibrato (chorus) of standard depth.
V3 (C3): deepest vibrato (chorus)
“Chorus” makes richness to the sound with blending direct and
vibrato tone.
This Mode can be selected on the top panel by holding each
[VIBRATO & CHORUS] button and press [V1] to [C3]button
(right fi gure).
❷
RATE
Sets the Speed of the Vibrato and Chorus eff ect.
Th
e setting range is 6.10 - 7.25 Hz.
❸ VIBRATO - TREMOLO
Sets Tremolo (amplitude modulation) of the Vibrato and Chorus
eff ect.
Th
e setting range is 0 - 15.
❹
EMPHASIS
Sets Emphasis (high frequency boost) of the Chorus eff ect (C1 / C2 / C3).
Th
e setting range is 0 - 9 dB.
❺ MIX
Sets Mixing ratio of the Chorus eff ect (C1 / C2 / C3).
Th
e setting range is D64 (only the Direct tone, no vibrato tone) - EVEN - 63V (only
the Vibrato tone, no direct tone).
❻
PEDAL
Sets Vibrato and Chorus aff ects on the Pedal part by [LOWER] button.
Th
e setting range is ON/OFF.
❼ DEPTH V1, ❽ DEPTH V2, ❾ DEPTH V3, ❿ DEPTH C1, ⓫ DEPTH C2, ⓬ DEPTH C3
Sets the Depth of each Vibrato and Chorus eff ect mode.
Th
e setting range is 0 - 15.
or, keep pressing either of the VIBRATO & CHORUS [UPPER], [LOWER]
buttons for a few seconds.
See “Function mode” (P. 66) for operation details.
MENU/
EXIT
ENTER
NOTE: All the parameters in these modes are
Patch Parameters. They are recorded
into the Patch.
PEDAL
On the vintage B-3/C-3, the Vibrato and Chorus
aff ects not only LOWER part but also PEDAL part
via [LOWER] (exactly, “GREAT”) tablet by the circuit
structure. It is divided on later models.
This parameter simulates that.
Setting the Vibrato & Chorus Mode
❶ ❶ ❷ ❷ ❸ ❸ ❹ ❹ ❺ ❺ ❻ ❻
❼ ❼ ❽ ❽ ❾ ❾ ❿ ❿ ⓫ ⓫ ⓬ ⓬
Press
With holding