Hammond SKX, Руководство пользователя

Страница: 110 / 156


Skx
Owner’s Manual
110
ZONES
To control external MIDI equipment, ranges on the keyboard of
the SKX are assigned. Th
ey are called “External Zones”.
Th e range of the built-in sound engine on the SKX (called “Inter-
nal Zone”) is set at the same time. You can use each separately on
a same keyboard.
Each MIDI keyboard connected to the MIDI IN jack can control
the external MIDI equipment with the External Zone.
To locate this mode:

WHAT IS DISPLAYED ON THE UPPER LEFT?
On the upper left of the Zone mode, the Zone to be operated
now is displayed.
INT: Internal zone
XZn: External zone (#n)
 
INTERNAL ZONE
❶ MANUAL BASS - MODE
Th is is for setting the how the Manual Bass (P. 32) works.
LOW: Sounds on lowest note if a chord is played.
CHRD: Sounds suitable bass note if a chord is played on Lower part.
POLY: Sounds the chord if a chord played.
❷ MANUAL BASS - LIMIT
Sets the upper limit note for the Manual Bass function.
❹ OCTAVE - UPPER
Sets the octave of the Upper part. It is linked with the [OC-
TAVE UP], [OCTAVE DOWN] buttons on the top panel.
❺
OCTAVE - LOWER
Sets the octave of the Lower part.

EXTERNAL ZONE
❻ SWITCH
Turns MIDI transmission “ON” or “OFF” for the selected
Zone.
❼ MIDI CHANNEL
Sets the MIDI channel for the selected Zone.
Th
e setting range is 1 to 16.
❽
KEYBOARD ALLOCATE
Selects which keyboard to allocate the selected Zone.
If you do not have a MIDI Pedalboard, set the “UPPER” and
“LOWER” only.
If you are using MIDI Pedalboard, you can use it to control the
External Zones by selecting “PEDAL”.
If you are connected to an external synthesizer and you want
to send Program Changes, etc. only without transmitting Note
data, set this parameter to “OFF”.
❾ ZONE - LOW
❿ ZONE - HIGH
Sets the Low and High note ranges for the selected Zone.
NOTE: 9 and 10 can also be set by pressing the [RECORD] button
with play the desired note on the keyboard.
⓫
PROGRAM - BANK MSB
⓬
PROGRAM - BANK LSB
⓭ PROGRAM - PROGRAM CHANGE
Sets Bank Select and the Program Change to send to the se-
lected Zone.
Bank Select and Program Change are used to switch sounds on
a connected MIDI unit such as a synthesizer or sound module.
Please consult the Owners Manual of your MIDI equipment
to obtain the proper settings for Bank and Program Changes.
You can select the Bank MSB and LSB at 0 to 127, the Program
Change at 1 to 128.
⓮ NOTE - OCTAVE
Sets octave shift to the selected Zone. If an external synthesizer
sound in a diff erent octave from that you desire, adjust this
parameter.
Th
e setting range is -2 to +2.
⓯ NOTE - VOLUME
Sets the volume (Control Change #7) to the selected Zone.
However, if CC# (20) is at “VOL”, this setting value is null.
Th
e setting range is 0 to 127.
See “Function mode” (P. 66) for operation details.
MENU/
EXIT
ENTER
❸ ❸ ❹ ❹
❻ ❻ ❼ ❼ ❽ ❽ ❾ ❾ ❿ ❿ ⓫ ⓫ ⓬ ⓬ ⓭ ⓭ ⓮ ⓮ ⓯ ⓯ ⓰ ⓰ ⓱ ⓱
❶ ❶ ❷ ❷ ❺ ❺