Hammond SK1, Руководство пользователя, Страница: 22 / 22

EXTRA VOICE Section
20
3. From the current screen, turn the VALUE Rotary Control until the Information Center Display looks
like this:
4. For this example, touch the SOLO Touch Tab so that only the Extra Voice will sound:
5. Follow the directions below which apply to your instrument.
Sk1, Sk1-73, Sk1-88
- Touch the SPLIT Touch Tab to enable Keyboard Split.
Sk2 - Proceed to the next step.
6. Sk1 - Play a chord on the manual to the left of the Split point. Hold the keys down.
Sk2
- Play a chord on the Lower Manual. Hold the keys down.
7. While holding the keys down,
Sk1
- Play a single-note melody to the right of the Split point.
Sk2 - Play a single-note melody on the Upper Manual.
You will hear the melody note plus harmony notes underneath the melody.
The above instructions apply to all of the Extra Voices with ProChord. Each ProChord Extra Voice will be a melody
note plus a different harmony pattern. The
Big Band Sax pattern has a 5-part open-harmony pattern, for example, while
the Old Time Pno pattern has a 4-part closed harmony pattern. There are also 2- and 3-part patterns. Feel free to
experiment with the different ProChord choices; however, remember that the harmony will ONLY sound if Lower
Manual notes are pressed and held while the melody is played.
NOTE: W hen a ProChord Extra Voice is selected, the Upper Manual becom es m onophonic - if a chord is played
with the right hand only one key will play. Therefore, when using Prochord play a single-note m elody.