14
15
turned to ON can lead to accidents.
• Remove the adjustment key before switching on the
device. If a wrench or adjustment key is left on the
rotating part of the power section, this can lead to
injuries.
• Do not over-tighten the attachment. Always make
sure that you can maintain a strong and balanced
stance. This assures better control in unexpected
situations.
• Do not over-estimate your capacities. Make sure
you have a secure stance and balance at all times.
This allows for better control over the device in
unforeseen situations.
• Wear appropriate clothing. Do not wear loose
clothing or jewellery. Make sure that hair, clothing
and gloves cannot become caught in the moving
parts.
• Never work at a higher speed than the maximum
rated speed of the drill bit.
• Always start drilling at a low speed and with the
drill bit in contact with the workpiece.
• Only apply pressure in a direct line with the bit,
and never apply excessive pressure.
4. USE AND CARE OF THE DEVICE
• Use the correct device configuration for the
respective application. A properly configured device
will allow better execution of the task and is safer for
the intended purpose.
• Do not use the device if the on/off switch is not
working correctly. Any device that cannot be
switched on and off with the switch is dangerous and
must be repaired immediately by a specialist dealer.
• Remove the battery pack from the device before
altering settings, replacing accessories or storing
tools. These safety measures help to avoid the risk of
the device switching itself on unintentionally.
• The device may only be used by children who
are 8 years of age or older and by people with
limited physical, sensory or mental capabilities
or a lack of experience and knowledge if they
are supervised or have received appropriate
instruction on how to use the device, to operate
the device safely and in accordance with
regulations, and have been adequately informed
of all dangers that may arise from its use.
• Cleaning and user care must not be carried out by
children unless they are older than 8 years of age and
are supervised.
• Maintenance of the device. Make sure that moving
parts are correctly attached, firmly in place, and free
from damage that could impair the functionality of
the device. If the device is damaged, you must have it
repaired by an authorized dealer.
• Keep the cutting tools clean and fresh. Properly
maintained cutting tools with sharp blades are less
likely to become clogged and are easier to control.
• Use the device and accessories in accordance with
these instructions, taking into account the working
conditions and the task to be performed. Using the
device for work for which it is not intended can lead
to dangerous situations.
• Only ever charge the battery using the charger
provided by the manufacturer.
• A charger designed for a different battery pack can
create a fire hazard if it is used for charging.
• When the battery pack is not in use, keep it away
from other metal objects as these could potentially
short-circuit the poles of the battery. If the poles of
the battery are connected to one another, a fire or fire
may result.
• In the event of improper working and storage
conditions, liquid can escape from the battery. Avoid
this coming into contact with the skin under all
circumstances. If you accidentally come into contact
with the liquid, rinse it off immediately with water.
M22606_HammersmithMultitool_Manual_V03_20220629_MM.indd 14
M22606_HammersmithMultitool_Manual_V03_20220629_MM.indd 14
20.07.22 12:21
20.07.22 12:21