Hammerhead SWITCH HHS1200, Руководство пользователя

Страница: 16 / 36

16
SWITCH™
_12V rIgHT aNgLE IMPaCT DrIVEr – auTO HaMMEr
OPERATING INsTRUCTIONs
Recommended Nails to Use
The tool is versatile for use with a variety of nails. Common and finishing nails from 2d to
8d are recommended for use with this tool.
Recommended Nailing Materials for the Impact Driver/Auto-hammer
The tool may be used for nailing into all types of woods, wood-like materials, and plaster
board.
NOTICE: The tool is not suitable for nailing in hard metal or concrete.
CARE AND MAINTENANCE
all maintenance should only be carried out by an authorized service organization.
Cleaning
before cleaning or performing any maintenance, lock the trigger switch on the tool by
placing the direction-of-rotation selector in the Off (center) position. for safe and proper
operation, always keep the tool and its ventilation slots clean.
always use only a soft, dry cloth to clean your impact driver/auto-hammer; never use
detergent or alcohol.
TROUbLEsHOOTING
PRObLEM POssIbLE CAUsE CORRECTIVE ACTION
The tool does not work battery is depleted Charge the battery
The tool stops rotation
during operation battery is depleted Charge the battery
bit cannot be installed
Sleeve is not released release the sleeve
bit does not fit the sleeve use suitable adaptor
Motor overheating be sure the cooling vents
are free from dust and
obstacles Clean and clear vents. Do
not cover with hand during
operation