16
Throttle Pedal
The right foot pedal is the throttle that controls the kart speed. As the engine speed
increase above idle, the clutch automatically engages and moves the vehicle forward.
To disengage the clutch at any time, allow the throttle to return to idle position.
WARNING:
Each time prior to starting the engine, check the throttle assembly to ensure
that when the pedal is pushed all the way forward the assembly is working smoothly and
returns to idle when released. Do not operate if pedal or engine throttle linkage fail to
return to idle. If unable to correct the problem through lubrication, adjustment or
replacement of worn parts, contact your local dealer for assistance.
Brake Pedal
The brake pedal is located on the left side of the kart. Apply pressure to the pedal
draws the brake caliper around the brake pump at the rear wheel and slows or stops the
vehicle.
Start Engine
To start the engine, first insert the key into the ignition key switch. This vehicle is
equipped with automatic start switch. Pull the choke cable out, the choke cable is
located on the left hand side of the steering wheel. Turn the “KEY IGNITION” to the
“ON” position and then push the “ELECTRIC START” button until you hear starter motor
cranking. DO NOT ATTEMP TO HOLD IGNITION START BUTTON FOR MORE THAN 10
SECONDS, AS IT WILL BURN UP THE STARTER MOTOR. If the engine does not start, wait
for 15 seconds before attempt to start the engine again. Once the engines starts, wait
5 minutes for the engine to warm up, and then push back the choke cable. The vehicle
is now ready for operate.
Stop Engine
To shut the engine off, turn the “KEY IGNITION” to “OFF” position. Allow yourself a
safe distance before coming to a stop.
Horn Switch
Press to Horn button to honk.
