1.4 AMP DETAIL SANDER 7
SAFETY INFORMATION
• Keep handles and grasping surfaces dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do not allow for safe handling and control of the
tool in unexpected situations.
Service
• Have your power tool serviced by a qualified repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained.
ADDITIONAL SAFETY WARNINGS
• Unplug the sander before changing accessories.
Accidental start-ups may occur if
sander is plugged in while changing an accessory.
• Use clamps or other practical way to secure and support the workpiece to a stable
platform.
Holding the work by hand or against your body is unstable and may lead to
loss of control.
• Your tool is equipped with a dust canister, empty it frequently, after completion
of sanding and before storing the sander.
Be extremely careful of dust disposal,
materials in fine particle form may be explosive. Do not throw sanding dust on an open
fire. Combustion from mixture of varnishes, lacquers, polyurethane, oil or water with
dust particles can occur if there is a static discharge, spark introduced in the box, or
excessive heat.
• Always wear eye protection and a dust mask for dusty applications and when
sanding overhead.
Sanding particles can be absorbed by your eyes and inhaled easily
and may cause health complications.
• Do not wet sand with this sander.
Liquids entering the motor housing is an electrical
shock hazard.
• Do not use sandpaper intended for larger sanding pads.
Larger sandpaper will
extend beyond the sanding pad causing snagging, tearing of the paper or kick-back.
Extra paper extending beyond the sanding pad can also cause serious lacerations.
• Keep the cord away from the spinning pad and sandpaper. The cord can become
entangled with the pad.
• GFCI and personal protection devices like electrician’s rubber gloves and footwear will
further enhance your personal safety.
• Do not use AC only rated tools with a DC power supply.
While the tool may appear to
work, the electrical components of the AC rated tool are likely to fail and create a hazard
to the operator.
• Keep handles dry, clean and free from oil and grease.
Slippery hands cannot safely
control the power tool.
