1.4 AMP DETAIL SANDER 13
OPERATING INSTRUCTIONS
6. Sanding
The sander can be used for most sanding operations on materials such as wood, plastic,
metal and painted surfaces.
Where possible, secure smaller workpiece to prevent them from moving under the sander.
Lower the sander in contact with the workpiece without pressure and then start the sander.
Move the sander slowly over the surface of the workpiece in a circular or curved motion
with an even, moderate pressure.
If there are still scratches on your work after sanding, try either of the following:
- Go back to a coarser grit and sand the marks out before recommencing with the original
choice.
- Try using new sanding sheet of the same grit to eliminate the unwanted marks before
progressing to a finer grit and finishing the job.
7. Application Advice
a) Use the tool with its standard
backing pad for sanding large
work surfaces, corners, and
edges.
b) Use the tool with triangle shape
attachment for hard-to-reach
areas.
7
