Hammerhead Charger 48V, Руководство оператора

Страница: 39 / 55

Preventative Maintenance 3.
Inspection
3.1.
Examine the outside appearance of the battery. The tops of the batteries and •
terminal connections should be clean, free of dirt and corrosion, and dry. Refer to
Cleaning
section 3.2
If fluids are on the top of a flooded/wet battery this may mean that the battery is •
being over-watered. Refer to Watering section 3.3 for proper watering procedure.
If fluid is on the top of a gel or AGM battery this means that the battery is being
overcharged and the performance and life will be reduced
Check battery cables and connections. Replace any damaged cables. Tighten any
•
loose connections. Refer to Torque Values section 2.2.2
Cleaning
3.2.
Check that all vent caps are secured properly on the battery •
Clean the top of the battery, terminals and connections with a cloth or brush and a •
solution of baking soda and water. Do not allow cleaning solution to get inside the
battery
Rinse with water and dry with a clean cloth
•
Apply a thin coat of petroleum jelly or terminal protector that can be purchased •
through your local battery dealer
Keep the area around batteries clean and dry
•
9
TROJAN BATTERY USER’S GUIDE