BRAKE SYSTEM BREAK-IN
Apply only moderate braking force for the first 50 stops. Aggressive or overly
forceful braking when the brake system is new could damage brake pads and
rotors.
CVT BREAK-IN (CLUTCHES / BELT)
A proper break-in of the clutches and drive belt will ensure a longer life and
better performance. Break in the clutches and belt by operating at slower
speeds during the break-in period as recommended. Avoid aggressive
acceleration and high speed operation during the break-in period.
PRE-RIDE INSPECTION
Failure to inspect and verify that the vehicle is in safe operating condition before
operating increases the risk of an accident. Always inspect the vehicle before
each use to make sure it's in safe operating condition.
ITEM
REMARKS
REF.
Brake system/pedal
travel
Ensure proper operation
Brake fluid
Ensure proper level
Front suspension
Inspect, lubricate if necessary
Rear suspension
Inspect, lubricate if necessary
Steering
Ensure free operation
Tires
Inspect condition and pressure
Wheels/fasteners
Inspect, ensure fastener tightness
Frame nuts, bolts,
fasteners
Inspect, ensure tightness
–
Fuel and oil
Ensure proper levels
Grass and Debris
Remove grass and debris from the vehicle,
especially on the underside and near the
exhaust system
–
Throttle
Ensure proper operation
Indicator lights/switches
Ensure proper operation
–
Air Filter
Inspect and clean or replace
Daytime running lights
Ensure proper operation
Brake Light
Ensure proper operation
–
32