LIGHTS
HEADLAMP REPLACEMENT
If a headlight becomes damaged or inoperable, the entire headlight assembly
must be replaced. An authorized dealer can assist.
TAIL LIGHT LAMP REPLACEMENT
If the brake light doesn't work, the lamp may need to be replaced.
1. Remove the two screws securing
the lens cover.
2. Remove the lens cover.
3. Remove the lamp and replace it with
a new recommended lamp.
4. Test the light for proper operation.
5. Reinstall the lens cover.
VEHICLE IMMERSION
NOTICE
If your vehicle becomes immersed, major engine damage can result if the
machine is not thoroughly inspected. Take the vehicle in for service before
starting the engine. Your HAMMERHEAD dealer or authorized person can
assist.
If it’s impossible to take your vehicle to a dealer before starting it, follow the
steps outlined below
1. Move the vehicle to dry land.
2. Check the air box. If water is present, dry the air box and replace the filter
with a new filter. Thoroughly dry the air pre-filter. See the Air Filter section for
details.
3. Remove the air box drain plug to drain any water. Reinstall the drain plug
securely.
4. Remove the spark plug.
5. Loosen carburetor drain screw.
6. Turn the engine over several times using the electric start.
70
