Hammerbacher VXDSM, Руководство по эксплуатации, Страница: 53 / 128

XDSM 53
Restriction of the route
There are two ways of restricting the adjustment range of the table, for example to avoid collision
with windows or containers.
These two stop positions can then no longer be exceeded or undercut:
1. a container stop position can be set in the lower half of the travel range
can be set.
2. one shelf-stop position for the upper range
Setting the Stop Positions
▴
or
▾
Move the table tops with the "UP" or "DOWN" button to the desired top or
bottom position.
Saving the Stop Position
S
Press the "SAVE" button for 10 seconds.
It "clicks" twice when the position is saved.
or
▴
&
▾
press both buttons for 10 seconds.
It "clicks" twice when the position is saved.
Deactivating the Stop Positions
▴
or
▾
Move the table tops with the "UP" or "DOWN" button to the stored top or
bottom position.
Deleting the stop position
S
Press the "SAVE" button for 10 seconds.
It "clicks" once when the position is deleted.
or
▴
&
▾
press both buttons for 10 seconds.
It "clicks" once when the position is deleted.