Hammer N2-35 Скачать руководство пользователя страница 2

Страница: 2 / 60

Bandsaw

N2-35

Hammer

A product of the FELDER GROUP!

For the safety of all personnel, it is necessary to study this manual thoroughly before assembly and operation.

This manual must be kept in good condition and should be considered as part of the machine. Furthermore,

the manual must be kept to hand and within the vicinity of the machine so that it is accessible to operators

when using, maintaining or repairing the machine.

Attention!: The machine must be inspected immediately upon arrival. If the machine has been damaged during

transport, or if any parts are missing, a written record of the problems must be submitted to the forwarding

agent and a damage report compiled. Also be sure to notify your supplier immediately.

Note: Year of construction

The machine number of this machine will be printed on the cover sheet of this operating manual.

The final two digits of the machine number show the year of construction of this machine.

e.g. XXX.XX.XXX.19 -> year of manufacture 2019

KR-FELDER-STR.1

A-6060 Hall in Tirol

Tel.

+43 (0) 5223 / 45 0 90

Fax:

+43 (0) 5223 / 45 0 99

E-mail:

[email protected]

Internet: www.hammer.at

Содержание N2-35





























































Результаты поиска

Содержание N2-35

Отзывы:

Похожие инструкции для N2-35

Бренды по названию

Популярные бренды

Hammer N2-35, Руководство пользователя

Результаты поиска

Содержание N2-35

Отзывы:

Похожие инструкции для N2-35

Бренды по названию

Популярные бренды