Hammer A3-26, Руководство пользователя

Страница: 9 / 72

9
Planer-Thicknesser
A3-26 / A3-31 / A3-41
2 Safety
At the time of its development and production, the
machine was built in accordance with prevailing
technological regulations and therefore conforms to
industry safety standards.
However, hazards may arise should the machine be
operated by untrained personnel, used improperly or
employed for purposes other than those it was designed
for. The chapter entitled “Safety” offers an overview
of all the important safety considerations necessary to
optimise safety and ensure the safe and trouble-free
operation of the machine.
To further minimise risks, the other chapters of this
manual contain specific safety instructions, all marked
with symbols. Besides the various instructions, there are
a number of pictograms, signs and labels affixed to the
machine that must also be heeded. These must be kept
visible and must not be removed.
2.1 Intended use
The planer-thicknesser HAMMER A3-26, A3-31, A3-41
has been designed solely for surface planing, thickness
planing and mortising wood and similarly machinable
materials. Machining materials other than wood is
only permitted with the express written consent of the
manufacturer. Operational safety is guaranteed only
when the machine is used for the intended purposes.
Attention! Any use outside of the machine‘s intended purpose shall be considered improper and is there-
fore not permitted. All claims regarding damage resulting from improper use that are made against the
manufacturer and its authorised representatives shall be rejected. The operator shall be solely liable for
any damage that results from improper use of the machine.
The term “proper use” also refers to correctly observing
the operating conditions as well as the specifications and
instructions in this manual.
The machine may only be operated with original
manufacturer parts and accessories.
2.2 Manual contents
All those appointed to work on or with the machine must
have fully read and understood the manual before
commencing any work. This requirement must be met
even if the appointed person is familiar with the
operation of such a machine or a similar one, or has
been trained by the manufacturer.
Knowledge about the contents of this manual is a
prerequisite for protecting personnel from hazards and
avoiding mistakes so that the machine may be operated
in a safe and trouble free manner. It is recommended
that the operator requests proof from the personnel
that the contents of the manual have been read and
understood.
2.3 Making changes and modifications to the machine
In order to minimise risks and to ensure optimal
performance, it is strictly prohibited to alter, retrofit or
modify the machine in any way without the express
consent of the manufacturer.
All the pictograms, signs and labels affixed to the
machine must be kept visible, readable and may not be
removed. Pictograms, signs and labels that have become
damaged or unreadable must be replaced promptly.
Safety