Hammer Strength HDU-ADAT, Руководство пользователя и инструкции по сборке, Страница: 32 / 58

2. Connect the corner brace weldment to the tower and iD assemblies. Hand tighten hardware.
Item Description Qty.
1 Tower Assembly 1
2 Screw, 1/2-13 X 4.5 4
3 Backing Washer 4
4 iD Assembly 1
5 Washer, Step, 1/2 in, 0.57 in 2
6 1/2 in Lock Nut 4
7 Corner Brace Weldment 1
8 1/2 in Star Washer 2
3. Connect the lower tower assembly, storage assembly and cross member with connecting weldments and hand
tighten hardware.
Item Description Qty.
1 Tower Assembly 1
2 Rectangle Tubing Nut, 11GA, 3" 4
3 6 Inch Cross Member Weldment 1
4 Screw, 1/2-13 X 1.25 4
5 1/2 in Star Washer 4
6 iD Assembly 1
4. Tighten hardware with backing washers to 20-25 ft-lb (27.1-33.9 nm) Tighten all other hardware to 45-50 ft-lb
(61-67.8 nm).
Mullet NX Assembly
1. Connect the upper tower assembly and storage assembly with connecting weldment and hand tighten hardware.
Item Description Qty.
1 Tower Assembly 1
2 Rectangle Tubing Nut, 11GA, 3" 2
3 1/2 in Star Washer 4
4 Screw, 1/2-13 X 1.25 2
5 Lock Nut, 1/2" 2
6 NX Storage Assembly 1
7 Backing Washer 2
8 Screw, 1/2-13 X 4.5 2
9 6 Inch Cross Member Weldment 1
Page 30 of 55