Hammer Strength FWAC, Руководство пользователя

Страница: 45 / 54

4. Maintenance Procedures
Maintenance Schedule
ACTION DAILY WEEKLY MONTHLY AS NEEDED
CLEAN
Upholstery X
Hand Grips X
WAX
Frames X
INSPECT
Belts X
Paint X
Hardware X
Frame X
Hand Grips X
Clean
• Upholstery with an approved or compatible cleaner.
• Hand grips with an approved or compatible cleaner.
Wax
• Frames with a standard, non-abrasive, wax finish.
Inspect
• Hardware. Check for loosening. Tighten as required.
• Belts. Look for wear or damage and proper tension. Pay close attention at bends and attachment points.
• Frames. Inspect for wear and damage.
• Hand grips. Check for wear and damage.
• For paint chips. Fill in immediately with manufacturers touch-up paint.
Once a Day
• Wipe down upholstery with a mild soap and water or comparable all purpose cleaner.
Once a Week
• Visually inspect all hardware for loosening, tampering or wear.
• Check condition of hand grips.
Once a Month
• Inspect hardware on all machines and tighten any bolts or nuts that may have loosened over the life of the product.
Notes
• Use polishing compound (such as car wax) and remove shoe scuffs from powder coated surfaces as necessary.
Approved and Compatible Cleaners
Two preferred cleaners have been approved by reliability experts: PureGreen 24 and Gym Wipes. Both cleaners will
safely and effectively remove dirt, grime and sweat from equipment. PureGreen 24 and the Antibacterial Force
formula of Gym Wipes are both disinfectants that are effective against MRSA and H1N1.
PureGreen 24 is available in a spray which is convenient to use. Apply the spray to a microfiber cloth and wipe down
the equipment. Use PureGreen 24 on the equipment for at least 2 minutes for general disinfection purposes and at
least 10 minutes for fungus and viral control.
Page 43 of 51