Hamlet Wireless Access Point 150, Руководство пользователя

Страница: 98 / 172

Wireless Access Point HNW150AP
User Manual 98
Push Button method
Wireless Gateway supports a virtual button “Start PBC” on the
Wi-Fi Protected Setup page
for Push Button
method. If users push a virtual button “Start PBC”, AP will initiate a WPS session and wait for any station to
join. At this moment, AP will detect whether there is more than one station that starts the PBC method.
When multiple PBC sessions occur, users should try PIN method.
After users push AP’s virtual button “Start PBC”, they must go to station side to push its button within two
minutes. If the WPS is successfully done, AP will give its wireless profile to that station. The station could
use this profile to associate with AP.
1. From the left-hand
Wireless -> WPS menu. The following page is displayed:
2. Make sure AP is in un-configured state.
3. Click
Start PBC .
4. Users must start the PBC method on the station side within two minutes.
5. Users must start the PBC method on the station side within two minutes.