Hamlet STEREO SCOPE 503 EM, Руководство оператора

Страница: 15 / 22

15
TECHNICAL SPECIFICATION
DISPLAY
The audio bar graphs are burnt into the decoded video signal.
Channels 1 and 2 are displayed on the left side.
Channels 3 and 4 are displayed on the right side.
Embedded audio groups 1 to 4 are selected by an internal switch.
SIGNAL CONNECTIONS
Audio
3 pin XLR female socket and passive loop per AES/EBU channel.
Balanced input, impedance 470 ohms.
SDI in 75 ohm BNC socket.
Loop Re-clocked active loop output. 75 ohm BNC socket.
Out YUV/RGB and composite outputs to monitor, 1 Volt to 75 ohms.
DIGITAL DECODER
Input:
SMPTE 259M, ITU-R BT.601/656 serial component. 800mV pp +/-
10% auto equalised to 300 metres.
Output Y,U,V, +/-1db to 5.5MHz. Oversampling digital filter for CCIR 601
compatibility.
AUDIO CHARACTERISTICS
Digital
0 to -50db scale with PPM characteristics.
Option
Toggles between BS5428 type 2a meter (1 to 7) and
Nordic type 1 meter (+12 to -12)
POWER REQUIREMENTS
AC:
105V-120V A.C. at 48Hz to 66Hz @ 8VA, with 100ma slow T fuse.
AC: 210V-250V A.C. at 48Hz to 66Hz @ 8VA, with 100ma slow T fuse.
DC: 7V-14V D.C.@ 0.4 amps.
ENVIRONMENT
Indoor use, 5 to 45 deg.C. ambient to 2,000m.
Max humidity 80% to 31 deg.C decreasing to 50% at 40 deg.C.
Overvoltage category 2. Pollution degree 1.
WEIGHT
1.85Kg.