Hamlet STEREO SCOPE 503 EM, Руководство оператора

Страница: 12 / 22

12
OPERATING INSTRUCTIONS
REMOTE CONTROL
FOR MORE DETAILED INFORMATION, PLEASE READ THE DISC HELP FILE.
The software package is for remote control of the Hamlet 503EM from a personal computer
via an RS 232 serial link. It is recommended that the disk be copied to your hard disk drive
and then kept safely as a backup. Please note this version is for a Microsoft Windows™
Environment. Microsoft Windows 95™ and DOS versions are available from the factory if
required. Before installation of the application please ensure that your system is able to run it
correctly.
HARDWARE REQUIRED
IBM PC or 100% compatible personal computer with at least 1M Byte of RAM.
A VGA type colour monitor.
A Hard Disk Drive.
An RS-232 Serial Port for connection to the 503EM.
A Mouse.
A 3.5" Floppy Disk Drive .
SOFTWARE REQUIRED
MS DOS™ Version 3.3 or greater with Microsoft Windows™ Version 3.0 or greater.
Hamlet Video 503EM software (disk supplied).
The software consists of the following files:
503EM.EXE
Executable file
VBRUN300.DLL Runtime file
503EM.HLP HELP file. This is a text file which maybe printed out or called from
the HELP window while running the application.
503EM.SET Setup file of 4 bytes.
INSTALL.EXE Installs the software on your hard disk.
INSTALLATION FROM DOS:
To install the software on your hard disk first ensure the computer is in DOS, fit the
application disk in the floppy drive,
Type
A: to give the A:> prompt then type INSTALL <enter>
This will create a directory on your hard disk called C:\HAMLET then the application files
will be copied to that directory. Note: The files are not protected or compressed so they may
be manually copied to any directory required.
The INSTALL program also sets up the serial port