4
Package Contents
•
Dual bay enclosure 2.5”
•
USB 3.0 cable
•
USB power cable
•
Manual
•
Screws & screw driver
Setting the RAID Mode
RAID (Redundant Array of Independent Disks) is a set of
technology standards for teaming disk drives to improve fault
tolerance and performance.
The RAID mode should be set before installing the drives and then
first formatting the drives.
1.
Make sure the power is off.
2.
Set the RAID switch and select your preferred RAID mode.
There have 2 mode switch in the inner of the product, it can
form 4 kinds of different ways through these 2 switches, it can
realize 4 kinds of different functions as below.
3.
Install the hard drives as illustrated in the next pages
.
4.
Connect the device to the computer USB 3.0 port, HDD LED
should turn ON to indicate the hard drives were detected.
5.
Format the drives.
Note:
Changing the RAID mode will require you to re-format the
drivers. Make sure to backup all existing data first.
