10
Connect to computer
1.
Connect the mini USB end of the USB cable into the mini USB
port of the HDD enclosure.
2.
Connect the other end of the USB cable (type A) into any
active USB port of the computer.
3.
Connect the USB power cable to the enclosure and into an
available USB port of the computer.
4.
Let OS search and install the driver automatically.
5.
Use the disk management tool (PC) or disk utility (Mac) to
create a new partition and format the drives.
6.
Open “My Computer” to see your external hard drive ready to
use.
Note
:
To enjoy USB 3.0 super speed up to 5Gbps,your computer must be
equipped with built-in USB 3.0 ports or a USB 3.0 host PCI-e card.
You should use the included USB DC power cable to provide extra
power.
It is not possible to add more drives to an existing RAID array
without re-formatting it. When adding additional drivers at a later
point, they will only be detected after the device has been restarted
and the drivers have been re-formatted.
