(Wireless) ADSL VPN Firewall Router with 3DES Accelerator
Chapter 3: Basic Installation
14
Factory Default Settings
Before configuring your, you need to know the following default settings.
Web Interface:
Username: admin
Password: admin
LAN Device IP Settings:
IP Address: 192.168.1.254
Subnet Mask: 255.255.255.0
ISP setting in WAN site:
PPPoE
DHCP server:
DHCP server is enabled.
Start IP Address: 192.168.1.100
IP pool counts: 100
Username and Password
The default username and password are “
admin
” and “
admin
” respectively.
LAN and WAN Port Addresses
The parameters of LAN and WAN ports are pre-set in the factory. The default values are
shown below.
LAN Port
WAN Port
IP address
192.168.1.254
Subnet Mask
255.255.255.0
DHCP server function
Enabled
IP addresses for
distribution to PCs
100 IP addresses continuing from
192.168.1.100 through 192.168.1.199
The PPPoE function is
enabled
to automatically get the WAN
port configuration from the ISP,
but you have to set the
username and password first.
Attention
If you ever forget the password to log in, you may press the RESET button up to
6 seconds to restore the factory default settings.
Attention
Содержание HRDSL742
Страница 1: ...Version Release 1 54c HRDSL742 HRDSL742W Wireless ADSL VPN Firewall Router User s Manual...
Страница 2: ......
Страница 6: ......
Страница 62: ...Wireless ADSL VPN Firewall Router with 3DES Accelerator Chapter 4 Configuration 56 Packet Filter...