User Manual
HRDSL512/HRDSL512P4
27
ISP. Each IP address entered in the fields must be in the appropriate IP form, which is four
IP octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in
this format.
PPPoE/PPPoA:
Select this option if your ISP requires you to use a PPPoE connection.
This option is typically used for DSL services. Select Dynamic PPPoE to obtain an IP
address automatically for your PPPoE connection. Select Static PPPoE to use a static IP
address for your PPPoE connection. Please enter the information accordingly.
PPPoE/PPPoA
User Name:
Enter the user name exactly as your ISP assigned.
Password:
Enter the password associated with the user name above.
Encapsulation:
select Bridge in the Mode field, select either PPPoA or RFC 1483.
select Routing in the Mode field, select PPPoA, RFC 1483, ENET ENCAP or PPPoE.
Multiplex: Select the method of multiplexing used by your ISP. Choices are VC or LLC.
Half Bridge:
The Half Bridge mode can only be used when a single IP address has
been assigned by the ISP. It is used when the use of NAT is not desired and there is a
single computer attached to the router.
Connection:
The schedule rule(s) have priority over your Connection settings.
Always on
: Select Always on Connection when you want your connection up all the time.
Connect on Demand:
Select Connect on Demand when you don't want the connection up
all the time and specify an idle time-out in the Max Idle Timeout field
TCP MSS Option:
Enter the TCP Maximum Segment Size (MSS)
Get IP Address:
Choose Static or Dynamic
Static IP Address:
Enter the IP address of ADSL Router in dotted decimal notation, for
example, 192.168.1.254 (factory default).
IP Subnet Mask:
The default is 0.0.0.0. User can change it to other such as
255.255.255.0.Type the subnet mask assigned to you by your ISP (if given).
Gateway:
You must specify a gateway IP address (supplied by your ISP) when you use
1483 Bridged IP
in the
Encapsulation
field in the previous screen.
NAT:
Select this option to Activate/Deactivated the NAT (Network Address Translation)
function for this VC. The NAT function can be activated or deactivated per PVC basis
Default Route:
if enable this function, the current PVC will be the default gateway to
internet from this device
TCP MTU Option:
Enter the TCP maximum transmission unit (MTU)
Dynamic Route:
RIP Version:
(Routing Information protocol) Select this option to specify the RIP version,
including RIP-1, RIP-2M and RIP-2B. RIP-2M and RIP-2B are both sent in RIP-2 format;
the difference is that RIP-2M using Multicast and RIP-2 using Broadcast format
Содержание HRDSL512
Страница 22: ...User Manual HRDSL512 HRDSL512P4 22 Step1 Set your new password Step2 Choose your time zone ...
Страница 23: ...User Manual HRDSL512 HRDSL512P4 23 Step3 Set your Internet connection ...
Страница 24: ...User Manual HRDSL512 HRDSL512P4 24 Step4 Restart your ADSL Router to apply the new settings ...
