Hamlet HRDSL300N, Руководство пользователя

Страница: 67 / 71

Wireless ADSL2
+
Router HRDSL300N
User Manual 67
LAN Interface
I cannot access Wireless ADSL2+ Router from the LAN or ping any computer on the LAN.
STEPS CORRECTIVE ACTION
1
Check the Ethernet LEDs on the front panel. A LAN LED should be on if the port is
connected to a computer or hub. If the LAN LEDs on the front panel are off, refer to
Section A.1.2 .
2 Make sure that the IP address and the subnet mask of Wireless ADSL2+ Router and
your computer(s) are on the same subnet.
WAN Interface
Initialization of the ADSL connection failed.
STEPS CORRECTIVE ACTION
1 Check the cable connections between the ADSL port and the wall jack. The DSL
LEDs on the front panel of Wireless ADSL2+ Router should be on.
2
Check that your VPI, VCI, type of encapsulation and type of multiplexing settings are
the same as what you collected from your telephone company and ISP.
3 Restart Wireless ADSL2+ Router. If you still have problems, you may need to verify
your VPI, VCI, type of encapsulation and type of multiplexing settings with the
telephone company and ISP.
I cannot get a WAN IP address from the ISP.
STEPS CORRECTIVE ACTION
1
The ISP provides the WAN IP address after authenticating you. Authentication may
be through the user name and password, the MAC address or the host name.
2 The username and password apply to PPPoE and PPoA encapsulation only. Make
sure that you have entered the correct Service Type , User Name and Password
(be sure to use the correct casing).
Internet Access
I cannot access the Internet.
STEPS CORRECTIVE ACTION
1 Make sure Wireless ADSL2+ Router is turned on and connected to the network.
2 If the DSL LEDs are off, refer to Section A.1.3 .
3 Verify your WAN settings.
4 Make sure you entered the correct user name and password.
Internet connection disconnects.
STEPS CORRECTIVE ACTION
1 Check the schedule rules.
2 If you use PPPoA or PPPoE encapsulation, check the idle time-out setting.
3 Contact your ISP.