Important Notice:
This HA-1000 Unit requires CAT5 interconnection
Models that include the I/O control boards (E0873) are
interconnected from customer to teller unit with a single
CAT5 cable (E0889). This replaces the multi-conductor
cable used on previous versions.
Audio connections remain similar to previous models
requiring a separate multi-conductor cable (E0680)
connected between the customer unit and audio matrix.
Preoperational settings and inspections
The I/O control board requires jumpers and switches
to be properly set before operation. See Section below.
All Micro-Switches should be inspected for proper adjustment
and operation by manually moving the door and safety bar
before operating unit. Switches should be set to allow for
variations in the set-points due to temperature changes and/or
vibrations. This will insure that all adjustments and operations
are satisfactory.
