INSTALLATION INSTRUCTIONS FOR ARUBA
SUN™ SERIES
READ INSTRUCTIONS CAREFULLY BEFORE INSTALLING
– SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
IF YOU HAVE QUESTIONS, PLEASE CALL 310-217-0036 FOR CUSTOMER CARE ASSISTANCE
ARUBA
SUN™ SERIES CONTENTS:
System Bulbs T5 Reflectors LED Transformer
1.
Unpack the box CAREFULLY.
2.
Remove packaging material from the fixture.
3.
Verify that your order was shipped complete: fixture, bulbs, 2-T5 reflectors and LED transformer.
4.
Verify the unit will fit into your canopy.
5.
For easier mounting: hold the fixture inside your canopy and mark the location where you will be mounting the screws (not included) that will hold the
reflector in place.
Note:
If you have an easy access to your canopy it is will be best to install the reflector into the canopy before placing the bulbs onto the system.
Read all the instructions before installation to find out what will be easier for your application.
6.
Install the T5 bulbs into appropriate sockets
1.) For both lamp ends, unscrew the end cap sleeves from end cap 2.) Slide both end cap sleeves onto lamp with threads facing
contact housing. out towards the mounting lamp pins
3
