Document #101-0163
14
1/10/06
•
Press F1 for Backup.
•
Next screen displays:
OVERWRITE CURRENT
BACKUP FILE Y/N?
•
Press Y.
•
Next screen displays:
OVERWRITE CURRENT
BACKUP FILE Y/N?
PLEASE WAIT .......
1
Note: A number will appear beneath “Please Wait” and will start counting up until it is finished.
You must be in
normal operation mode of the controller for this to work. It will not work if in programming mode.
•
Once complete, the next screen displays:
F1 BACKUP
F2 RESTORE
F4 EXIT
•
Press F4 for Exit.
•
Next screen displays:
F1 CONTROLLER BACKUP
<-- PRV F4 EXIT NXT -->
•
Press F4.
•
Next screen displays:
F1 REPORTS
F2 CREDIT MENU
F3 SETUP
LAST POSTED
At this point turn the off power to the machine and unplug the hand-held from the EIC. Wait about 10 seconds
and turn power back on.
Once the backup is complete, the next step will be to remove the chip from the controller if necessary (see
Chip Replacement in the GL-ACW section of this manual).
