Document #101-0193
10
11/21/07
GOOD-BYE
OK TO DISCONNECT
Once that screen appears, disconnect your handheld cable from the controller and reinstall the original system
harness. Now cycle power or press the reset button on the controller.
PAYOUTS
The amounts to charge the credit card and number of tokens to dispense can be programmed using the
configuration screen available from the DAN, or by using the handheld interface. If you don’t want to use all
of the six possible selection choices set the charge amount to zero and that selection will be skipped. If only
one selection is left programmed with a non-zero charge amount then the user will not be required to push the
button to make a selection. Since there are no choices for the user in this case he simply swipes a card and the
machine dispenses the programmed amount of tokens.
If you are using Hamilton Customer Value Cards to help market your carwash you can allow your customers
to check their card balance at this machine. To make “Balance Check” one of the selection choices enter the
special charge amount of $99.99. This will present the customer with the option to swipe a value card then
display the remaining balance.
OPTIONS
You have a programmable option to enable or disable accepting value cards for purchase of tokens at this
machine. You might choose not to accept value cards if you are both selling value cards at a discount and
offering bonus payouts for larger token purchases. This prevents your customer from “double dipping” the
incentive discounts. Value card balance checks are still available in either case. By default accepting value
cards is enabled.
You have a programmable option to enable or disable accepting credit cards at the machine. You might choose
not to accept credit cards if you are using Hamilton Value Cards and your main purpose for the machine was
to convert the card value into tokens that can be used easily in the wash bays, vacs, and vending machines.
This makes the machine accept only Hamilton Value Cards eliminating the higher transaction fees associated
with credit cards. By default accepting credit cards is enabled.
SPECIAL STATUS DISPLAY MESSAGES
Normal operation when the machine is powered up is to display the controller version number for a few
seconds then “Welcome” with scrolling instructions for the customer. If it fails to operate properly and goes out
