Hamilton/Buhl MPC5050BT, Инструкция по эксплуатации, Страница: 7 / 14

recemanually
Using the Radio
1. Press the SOURCE button to select FM mode.
2. The LCD DISPLAY will show the frequency of the radio.
Automatic Tuning of Radio
1. In FM mode, / TUNE+ or / TUNE– button press and release the
to automatically search for the next available station.
2. If the reception is poor, use the Manual Tuning to fine-tune the station. If
the reception does not improve, try altering the position / length of the
antenna. If the reception is still poor, scan again to determine whether a
stronger signal exists for the desired frequency.
Manual Tuning of Radio
1. In FM mode, press the / TUNE+ or / TUNE – to manually scan
through the frequency band.
2. If the reception does not improve, try altering the position / length of the
antenna. If the reception is still poor, scan again to determine whether a
stronger signal exists for the desired frequency.
Programming Radio Presets
You can preset up to 20 stations.
1. Tune to the station you wish to preset (see Using the Radio).
2. Press the
MEM / PROG button, the preset station number ( P01-P20) will
appear on the display.
3. Use the STOP / M+ button to select the preset position.
4. Press the MEM / PROG button again to save the current station into the
specified preset.
5. Repeat steps 1-4 to store additional radio presets.
Recall a Preset Radio Station
1. Press the STOP / M+ button to search for your preset radio stations.
Listening to the Radio
7