Hamilton/Buhl MPC5050BT, Инструкция по эксплуатации, Страница: 11 / 14

Insert or remove a Cassette Tape
1.
To insert your cassette tape
:
Press the STOP/EJECT button to
open the cassette door. Insert your cassette tape into the
compartment with the exposed section of the tape facing upwards. The
side that you wish to listen to or record onto should be facing towards you.
Push the cassette door until it locks in place.
2.
To remove your cassette tape
:
press the STOP/EJECT button to
open the door then lift the cassette out.
Playing the Cassette Music
1. Press the SOURCE button to select TAPE mode.
2. When the TAPE mode is selected, “TAP” will appear on the LCD display.
3. Insert the cassette tape and press the PLAY button.
5. Press the STOP/EJECT button to stop the tape. Press the STOP/EJECT button
again to open the cassette door.
Recording to your Cassette tape
1. Insert a cassette.
2.
Select the source you want to record (CD / FM / BT / AUX/ TAP)
and start playing the selected source.
3. If you select TAPE mode, you can speak into the unit to record your voice.
For better quality please ensure you are facing the cassette door.
4. Press the RECORD button to start recording.
5. To stop the recording, press the STOP/EJECT button once.
6. To playback the recording, press the REW. button to rewind and
press the
PLAY button to start playing.
Listening to a Cassette
11
4. The unit will automatically stop playing when it has reached the end of
the cassette. If you wish to continue playing the cassette; please press
STOP/EJECT , remove the cassette, flip the cassette over to the other side,
reinsert the cassette and press PLAY
Note: To avoid damage to the unit and your cassette, press the STOP/EJECT
in between each operation.
For example; when fast forwarding your cassette while playing, always press
STOP/EJECT
before pressing
F.FWD
.
6. Press the F.FWD OR REW . button to fast forward or rewind through the tape.