9
Troubleshooting
Problem
Possible Causes
Solution
No hot or
cold water.
1. Dispenser is not
plugged in.
2. The fuse is blown/circuit
breaker is tipped.
3. Cold/Hot Water switch is
not turned on.
4. Over consumption of
cold or hot water in a short
period of time.
1. Push plug completely into
outlet.
2a. Replace house fuse/reset
circuit breaker.
2b. If too many items are
plugged into a single circuit,
move some items to a differ-
ent circuit.
3. Turn on Cold/Hot water
switch (#5/#6 on the Parts
and Features list).
4. Wait 30 minutes before us-
ing again.
No water
running out
of spigots.
1. Empty water bottle.
2. Inlet of water bottle sup-
porter blocked by bottle
seal.
3. Mineral deposits clog-
ging tank.
1. Replace with new bottle.
2. Remove water bottle and
check inlet. Clean out waste
paper and insert bottle again.
3. See Care and Cleaning.
Water dis-
penser leaks
from the out-
side.
Crack or pin hole in water
bottle
Replace with new bottle
Water has
poor taste or
odor.
Tank needs to be cleaned
or sanitized
See “Sanitizing and Cleaning”
instructions
