7
6
Press the Snooze/Dimmer button during normal operation to adjust
the brightness of the LCD display.
Setting the Brightness of the Display
HOW TO INSTALL/REPLACE BATTERY:
Remove the plastic tab from the battery cover; then remove the
battery cover on the bottom of the unit using a screwdriver.
This unit contains 2 AAA batteries as a backup power source. The
battery keeps the clock and the alarm operating in the event of a
power interruption.
PLAYING THE RADIO:
1.
Press the Radio ON/OFF button.
2.
Select AM or FM mode.
3.
For manual tuning, use the Tune + and – buttons to select
station.
4.
For preset tuning, select preset buttons 1–5.
5.
Adjust volume using the and – buttons.
Operation
1.
Set Daylight Savings Time (DST) switch to proper position.
2.
Remove top cover by grasping finger latch and lifting up.
3.
Press and hold the Time Set button.
4.
Use the Alarm Time + and – buttons to to set current time.
5.
Release the Time Set button.
ADJUSTING FOR DAYLIGHT SAVINGS TIME:
1.
Slide the DST switch to +1 to advance the time 1 hour.
2.
Slide back to OFF position to turn the clock back 1 hour.
Setting Clock Time
1.
Press and hold the Alarm Set button.*
2.
Adjust the time using the Alarm Time + and – buttons.
3.
Release Alarm Set button and set Alarm Mode.
SELECTING RADIO/iPod FOR ALARM:
Follow steps 1 and 2 above under “Setting Alarm Time.”
*
Select Station
will appear on the display. If waking to music is
desired, music choice and time preference can be set in any order.
Radio preset can only be selected when slide switch is in Music
position.
Setting Alarm Time
SETTING ALARM MODE:
Slide Alarm Mode switch to desired setting: Music or Buzzer.
The corresponding mode will be indicated on the LCD display.
TO SNOOZE:
Press the Snooze/Dimmer button after the alarm sounds.
TO DEACTIVATE THE ALARM:
Current alarm time and wake mode can be viewed on the
display. Slide the Alarm Mode to OFF position to deactivate.
Setting Alarm Time
(cont.)
The Anti-Theft Clip is used to prevent theft.
1.
Plug power cord into outlet.
2.
Remove existing screw from outlet faceplate.
3.
Replace screw with provided Phillips head screw and secure
tightly.
Anti-Theft Clip
840189503 ENv02.qxd:840168500 Ev01.qxd 1/26/12 10:33 AM Page 6
