5
the red lights go off, it is on a warm-keeping status. When the green indicator light on,
the cooling system works. When the green light goes off, it is on a cold keeping status.
● If the device is not applied for a long time, after the hot water cools down, please
remove the power plug and drain the rest water in the hot tank. Then tighten the cap.
Open the cold water tap to drain the rest water in the cold tank.
● If there is no water flowing from the cooling tap, please shut down the cooling switch
until there is no water flowing out.
● Steps of changing water:
1.Open the door gently to keep it at a suitable angle, then pull out the water tube.
2. After pulling out the water tube, you can hang it on the hook of the door.
3. Remove the cap of the bottle, put the water tube into the new bottle, and press it
tightly or the pump may not pump the water into the water tank.
4. Put the bottle into the cabinet of the water dispenser.
5. The diameter of the water bottle should be less than 270mm.
● Instructions of water shortage indicator light:
1. When there is water in the water shortage tank, the water shortage indicator light is
off.
2. When the water tank is overflowing, the water shortage indicator light is off and
alarms for one minute.
3. When there are no water in the water shortage tank, the water shortage indicator
light flickers.
4. When there is water in the storage tank but no water in the bottle, the water
shortage indicator light is on & alarm for 30 seconds.
5. When the shortage water tank and bottle are both lacks of water, the whole
machine is locked, the water shortage indicator light flickers and alarms for 30
seconds.
6. When opening the door, the pump stops working, if the water level in the cold tank
is higher than the water control level, the machine will still work normally.
7. When using a 5-gallon rectangular bottle, slide into place as shown below.
8. After changing water and closing the door, hot and the cold tank has been full of
water, then the water leakage lamp will be off itself.
Содержание HBWC114-SSWH
Страница 2: ...2 always ...
Страница 8: ...8 DIMENSIONS PRODUCT DEPTH IN 13 8 PRODUCT HEIGHT IN 41 1 PRODUCT WIDTH IN 12 2 WIRING DIAGRAM ...
Страница 11: ...11 ...