Hamilton Beach HBIC2900-BLACK, Руководство пользователя

Страница: 7 / 24

4
7
OPERATING PROCEDURES & MAINTENANCE
1. Remove the exterior and interior packaging. Check if ice basket and ice scoop are
inside. If any parts are missing, please contact our customer service.
2. Remove the tape for fixing ice shovel, ice basket & ice scoop. Clean the tank &
ice basket.
3. Put the ice maker on a level & flat counter top without direct sunlight and other
sources of heat (i.e.: stove, furnace, radiator). Maker sure that there is at least 4
inches gap between the back & left and right sides with the wall.
4. Allow one hour for the refrigerant fluid to settle before plugging the ice maker in.
5. The appliance must be positioned so that the plug is accessible.
WARNING: Fill with potable water only. Only use drinking water.
UNPACKING YOUR ICE MAKER
1. This unit should be properly grounded for your safety. The power cord of this
appliance is equipped with a grounding plug which mates with standard grounding
wall outlets to minimize the possibility of electric shock.
2. Plug your appliance into an exclusive, properly installed, grounding wall outlet. Any
questions concerning power and or grounding should be directed toward a certified
electrician.
3. This appliance requires a standard 120 Volt, 60Hz electrical outlet with good
grounding means.
Before using your ice maker, it is strongly recommended to clean it thoroughly.
Unplug the unit before cleaning or making any maintenance.
1. Take out the ice basket.
2. Clean the interior with diluted detergent, warm water and a soft cloth.
3. Then rinse the inside parts with water, and drain out the water by unplugging the
drain cap on the front bottom side.
4. The outside of the ice maker should be cleaned regularly with a mild detergent
solution and warm water.
5. Dry the interior and exterior with a clean soft cloth.
6. When the machine is not in use for a long time, drain water completely out and
dry the interior.
CONNECTING YOUR ICE MAKER
CLEANING AND MAINTAINING YOUR ICE MAKER
DANGER
*Improper use of the grounded plug can result in the risk of electrical shock. If
the power cord is damaged please call our customer service.