Hamilton Beach HBH855 Series Скачать руководство пользователя страница 2

2

Blender Safety

IMPORTANT: This operation manual should be reviewed with all equipment operators as part of your 

operator training program. Keep manual available in the work area for users easy reference. 

1. 

Read all instructions. 

2. 

This appliance is not intended for use 

by persons with reduced physical, 

sensory, or mental capabilities, or 

lack of experience and knowledge, 

unless they are closely supervised 

and instructed concerning use of the 

appliance by a person responsible for 

their safety.

3. 

This appliance shall not be used by 

children. Keep the appliance and its 

cord out of reach of children.

4. 

Close supervision is necessary when 

any appliance is used near children. 

Children should be supervised to 

ensure that they do not play with the 

appliance.

5. 

Plug into a grounded electrical socket.

6. 

Do not remove ground prong.

7. 

Do not use an adapter.

8. 

Do not use an extension cord.

9. 

To protect against risk of electrical 

shock, do not put cord, plug, base, or 

motor in water or other liquid.

10. 

Do not spray the base with a  

high-pressure spray gun.

11. 

Turn the appliance OFF ( ), then 

unplug from outlet when not in use, 

before putting on or taking off parts, 

and before cleaning. To unplug, grasp 

the plug and pull from the outlet. 

Never pull from the power cord. 

12. 

Avoid contact with moving parts.

13. 

Do not operate any appliance with 

a damaged supply cord or plug, or 

after the appliance malfunctions or 

has been dropped or damaged in any 

manner. Supply cord replacement 

and repairs must be conducted by 

the manufacturer, its service agent, 

or similarly qualified persons in 

order to avoid a hazard. Call the 

provided customer service number for 

information on examination, repair, or 

adjustment.

14. 

Do not use outdoors.

15. 

Do not let cord hang over edge of 

table or counter or touch hot surfaces, 

including stove.

16. 

Keep hands and utensils out of the jar 

and away from the cutting blade, while 

blending or chopping food, to reduce 

the risk of severe personal injury and/ 

or damage to the blender or available 

attachments (attachments may not 

be provided with blender). A rubber 

spatula may be used but must be used 

only when blender is not running.

17. 

To prevent damage to blender, jar, or 

cutter assembly, DO NOT move or 

shake blender while in operation. If 

blending action stops during operation, 

turn blender OFF ( ), remove jar from 

base, remove jar lid, and use a thin 

rubber spatula to lid mixture toward 

cutters.

18. 

Blades are sharp; handle carefully— 

especially when emptying or cleaning 

the blender jar. 

19. 

Inspect jar and cutter assembly daily. 

Do not use broken, chipped or cracked 

jar. Check cutter for wear, nicks, or 

broken blades. Do not use broken or 

cracked cutting blades. 

20. 

If cutter assembly blades are loose, 

discontinue use immediately and 

replace cutter assembly. Do not 

attempt to repair or tighten cutter 

assembly. 

21. 

CAUTION: Do not 

operate without lid in 

place. Always operate 

blender with lid in place. Remove filler 

cap only for adding ingredients. 

IMPORTANT SAFETY INSTRUCTIONS

WARNING – 

When using electrical appliances, basic safety precautions should 

always be followed to reduce the risk of fire, electric shock, and/or injury to persons, 

including the following:

Содержание HBH855 Series

























Отзывы: